Description
8mm Diameter, M6 Hex Nut and Stud, Sleeve Masonry Anchors for Brick/ Block, Concrete, Stone. Zinc plated, NUT Type
Fixaballsell all lengths of 8mm diameter hex nut,sleeve, masonry anchors.
Hex Nut Sleeve Anchor Description
A hex nut sleeve anchor is an expansion anchor for fixing to all types of masonry, brick and non-porous stone.The Hex Nutsleeve anchor is a thin walled sleeve anchor suitable for use in concrete, stone, brickwork, perforated bricks and dense concrete blocks. The diagonal slot enables the small gaps to be pulled down and a positive clamping force to be exerted through the fixture.
Orders placed before 2pm are dispatched same day (Mon-Fri).
Standard, Free Delivery is Royal Mail, 2nd Class (2-5 days, most likely 2 days). For a faster delivery time, select 1st class or courier at checkout.
Please make your ‘no. of items in pack’ and ‘quantity’ of packs, selection from the drop down menus.
Stud and Sleeve Diameters
| Thread Diameter | Anchor Hole Size | Anchor Length |
| M6 | 8mm | 40mm |
| M6 | 8mm | 65mm |
| M6 | 8mm | 85mm |
Material Finish – Zinc
Use a zinc plated, masonry anchor when you need to hold materials/ fixtures in the dry. Using a zinc sleeve anchor in the wet will negatively effect it’s reliability, dramatically and make it fail in a relatively shorter time.
Installation
Drill the correct size hole, clear/ clean the hole, place the anchor in the hole, set the anchor by tightening the nut. Avoid over tightening the nut.
Table to show important sleeve anchor dimensions:
|
FIXABALL Sleeve Anchor NUT Type All measurements in mm |
|||||
|
Sleeve Anchor Size |
Drilled Hole Size |
Fixture Hole Size |
Thread Diameter |
Max. Fixture Thickness |
Minimum Hole Depth |
|
8 x 40 |
8 |
10 |
M6 |
12 |
35 |
|
8 x 65 |
8 |
10 |
M6 |
37 |
40 |
|
8 x 85 |
8 |
10 |
M6 |
50 |
40 |
Image is for illustrative purposes only.
