Description
3/8″ (M10), Penny Repair Mudguard Washers, A2/ 304 Stainless Steel,DIN 9021, ISO 7093
Fixaball sells 3/8″ penny repair washers in A2/ 304 Stainless Steel.
This listing is for metric fasteners that fit imperial. 3/8″ equivalent is M10 and the I.D is 0.06mm smaller but will be fit for purpose in the majority of circumstances.
A washer has multiple purposes depending on its shape, form and material. Generally speaking, a washer is used to:
- protect the surface of fastened materials,
- spread the load/ pressure at the hold points of fastened materials,
- assist with tightening and loosening of a fastener,
- control the spacing of connecting components
Repair Washershave a particularly large outside diameter.
5/16″Repair Penny Washer Sizes Available:
| Imperial STAINLESS STEEL PENNY WASHERS |
| 3/8″ X 25 X 1.5 PENNY WASHER A2 STAINLESS STEEL |
| 3/8″ X 30 X 1.5 PENNY WASHER A2 STAINLESS STEEL |
| 3/8″ X 35 X 1.5 PENNY WASHER A2 STAINLESS STEEL |
| 3/8″ X 40 X 1.5 PENNY WASHER A2 STAINLESS STEEL |
| 3/8″ X 50 X 1.5 PENNY WASHER A2 STAINLESS STEEL |
Orders placed before 2pm are dispatched same day (Mon-Fri).
Standard, Free Delivery is Royal Mail, 2nd Class (2-5 days, most likely 2 days). For a faster delivery time, select 1st class or courier at checkout.
Please make your size and pack quantity selection from the drop down menus.
Additional Information
A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such as a screw or nut. Other uses are as a spacer, spring (belleville washer, wave washer), wear pad, preload indicating device, locking device, and to reduce vibration (rubber washer). Washers usually have an outer diameter (OD) about twice the width of their inner diameter (ID).
Image is for illustrative purposes only.
