Description
M5, M6, M8, M10, M12Mudguard/ Repair/ Penny Washers BZP, Zinc Plated, DIN 9021, ISO 7093
Fixaball sell all sizes ofMudguard/ Repair/ Penny Washers, BZP.
Repair Washershave a particularly large outside diameter
Repair Washers are used with threaded fasteners (for example a bolt and a nut), designed to increase the load distribution.
- Mudguard (penny) washers have an extra large outer diameterto either spread a load more or to straddle a damaged/ oversized hole.
- Typically used to spread the tightening load over a greater area than a conventional flat washer.
- Bright Zinc Plate (BZP) finish offers resistance to corrosion.
Orders placed before 2pm are dispatchedsame day (Mon-Fri).
Standard, Free Delivery is Royal Mail, 2nd Class (2-5 days, most likely 2 days). For a faster delivery time, select 1st class or courier at checkout.
Please make your ‘No. of Items in Pack‘, ‘Size‘ and ‘Quantity’ of packs selection from the drop down menus.
Mudguard/ Repair/ Penny Washers BZP Sizes Available
| Mudguard/ Repair/ Penny Washers BZP – M5 x 20 (1.5mm thick) |
| Mudguard/ Repair/ Penny Washers BZP – M5 x 25 x (1.5mm thick) |
| Mudguard/ Repair/ Penny Washers BZP – M5 x 30 x (1.5mm thick) |
| Mudguard/ Repair/ Penny Washers BZP – M6 x 20 x (1.5mm thick) |
| Mudguard/ Repair/ Penny Washers BZP – M6 x 25 x (1.5mm thick) |
| Mudguard/ Repair/ Penny Washers BZP – M6 x 30 x (1.5mm thick) |
| Mudguard/ Repair/ Penny Washers BZP – M6 x 40 x (1.5mm thick) |
| Mudguard/ Repair/ Penny Washers BZP – M6 x 50 x (1.5mm thick) |
| Mudguard/ Repair/ Penny Washers BZP – M8 x 25 x (1.5mm thick) |
| Mudguard/ Repair/ Penny Washers BZP – M8 x 30 x (1.5mm thick) |
| Mudguard/ Repair/ Penny Washers BZP – M8 x 40 x (1.5mm thick) |
| Mudguard/ Repair/ Penny Washers BZP – M8 x 50 x (1.5mm thick) |
| Mudguard/ Repair/ Penny Washers BZP – M10 x 25 x (1.5mm thick) |
| Mudguard/ Repair/ Penny Washers BZP – M10 x 30 x (1.5mm thick) |
| Mudguard/ Repair/ Penny Washers BZP – M10 x 40 x (1.5mm thick) |
| Mudguard/ Repair/ Penny Washers BZP – M10 x 50 x (1.5mm thick) |
| Mudguard/ Repair/ Penny Washers BZP – M12 x 38 x (1.5mm thick) |
| Mudguard/ Repair/ Penny Washers BZP – M12 x 50 x (1.5mm thick) |
What is an Engineering Washer?
A washer has multiple purposes depending on its shape, form and material. Generally speaking, a washer is used to:
- protect the surface of fastened materials,
- spread the load/ pressure at the hold points of fastened materials,
- assist with tightening and loosening of a fastener,
- control the spacing of connecting components
Additional Information
A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such as a screw or nut. Other uses are as a spacer, spring (belleville washer, wave washer), wear pad, preload indicating device, locking device, and to reduce vibration (rubber washer). Washers usually have an outer diameter (OD) about twice the width of their inner diameter (ID).
Image is for illustrative purposes only.
