Description
6mm, 8mm, 10mm, 12mm Diameter, Sleeve Masonry Anchors for Brick/ Block, Concrete, Stone. A4/ 316 Stainless Steel, NUT Type
Fixaballsell all sizes of A4/ 316 Stainless, Sleeve, Concrete/ Masonry Anchors (NUT-Type).
Sleeve Anchor, ‘NUT’ Type Description
The Sleeve Anchor, ‘NUT’ Type is an expansion anchor for fixing to all types of masonry, brick and non-porous stone.The Stainless Steel A4sleeve anchor is a thin walled sleeve anchor suitable for use in concrete, stone, brickwork, perforated bricks and dense concrete blocks. The diagonal slot enables the small gaps to be pulled down and a positive clamping force to be exerted through the fixture.
Orders placed before 2pm are dispatched same day (Mon-Fri).
Standard, Free Delivery is Royal Mail, 2nd Class (2-5 days, most likely 2 days). For a faster delivery time, select 1st class or courier at checkout.
Please make your‘no. of items in pack’, ‘size’and‘quantity’of packs, selection from the drop down menus.
Sleeve Anchor, ‘NUT’ Type Sizes Available
| Anchor Hole Size | Anchor Length |
| 6mm | 60mm |
| 8mm | 40mm |
| 8mm | 65mm |
| 10mm | 50mm |
| 10mm | 75mm |
| 10mm | 100mm |
| 12mm | 60mm |
| 12mm | 75mm |
| 12mm | 100mm |
Material – A4/ 316 Stainless Steel
A4/ 316 is used when performance of a fixing depends on it’s ability to withstand constant weathering and chemical attack. A4 (otherwise known as 316 grade) stainless steel is marine grade, meaning that it can resist corrosion/ degradation under continuous, mild chemical exposure (eg. salt spray).
Installation
Drill the correct size hole, clear/ clean the hole, place the anchor in the hole, set the anchor by tightening the nut.
Table to show important sleeve anchor dimensions:
|
FIXABALL All measurements in mm |
|||
|
Sleeve Anchor Size |
Hole Size |
Thread Diameter |
Max. Fixture Thickness |
|
6 x 35 |
6 |
M4 |
9 |
|
6 x 56 |
6 |
M4 |
20 |
|
8 x 40 |
8 |
M6 |
12 |
|
8 x 65 |
8 |
M6 |
37 |
|
8 x 85 |
8 |
M6 |
50 |
|
10 x 40 |
10 |
M8 |
3 |
|
10 x 50 |
10 |
M8 |
12 |
|
10 x 77 |
10 |
M8 |
35 |
|
10 x 97 |
10 |
M8 |
50 |
|
12 x 60 |
12 |
M10 |
12 |
|
12 x 75 |
12 |
M10 |
27 |
|
12 x 99 |
12 |
M10 |
50 |
|
12 x 129 |
12 |
M10 |
80 |
Image is for illustrative purposes only.
