Description
8mm and 10mm, Sleeve Masonry Anchors for Brick/ Block, Concrete, Stone. Zinc plated, Countersunk Type
Fixaballsells all sizes of sleeve countersunk, concrete anchors.
Countersunk Sleeve, Masonry Anchor Description
A Countersunk sleeve anchor is an expansion anchor for fixing to all types of masonry, brick and non-porous stone. A countersunk head can fit into a countersunk hole leaving the fixing sitting flush, neat and modern on a visible surface.The Countersunk sleeve anchor is a thin walled sleeve anchor suitable for use in concrete, stone, brickwork, perforated bricks and dense concrete blocks. The diagonal slot enables the small gaps to be pulled down and a positive clamping force to be exerted through the fixture.
Orders placed before 2pm are dispatched same day (Mon-Fri).
Standard, Free Delivery is Royal Mail, 2nd Class (2-5 days, most likely 2 days). For a faster delivery time, select 1st class or courier at checkout.
Please make your size and pack quantity selection from the drop down menus.
Zinc Plated, Countersunk Sleeve Anchor Lengths Available:
| Description |
| Sleeve Anchors Csk Head ZYP – 8mm/M6 x 60mmArticle Number |
| Sleeve Anchors Csk Head ZYP – 8mm/M6 x 85mmArticle Number |
| Sleeve Anchors Csk Head – 10mm/M8 x 75mmArticle Number |
| Sleeve Anchors Csk Head – 10mm/M8 x 100mmArticle Number |
Zinc Plated, Countersunk Sleeve Anchor Installation
| Anchor Hole Size | Anchor Length | Pozidrive Size |
| 8mm | 60mm | PZ 3 |
| 8mm | 85mm | PZ 3 |
| 10mm | 75mm | PZ 3 |
| 10mm | 100mm | PZ 3 |
Zinc
Use a zinc plated, masonry anchor when you need to hold materials/ fixtures in the dry. Using a zinc sleeve anchor in the wet will negatively effect it’s reliability, dramatically and make it fail in a relatively short time.
Installation
Drill the correct size hole, clear/ clean the hole, place the anchor in the hole, set the anchor by tightening the nut.
Image is for illustrative purposes only.
