Description
UNF 7/16″, Hex Bolts and Hex Setsin A2/ 304 Stainless Steel, DIN 931
Fixaball sells all lengths of A2/ 304 Stainless Steel, 7/16″ UNF Bolts (unthreaded shoulder) and Hex Set Screws (fully threaded).
Bolt vs Set
A Hex Bolt is the term used for apartially threadedfastener, with a hexagon head; designed to be used with a nut and washer. A HexSet (Screw Bolt)is the same, except it isfully threaded.
Orders placed before 2pm are dispatchedsame day (Mon-Fri) and free shipping is Royal Mail, 2nd Class (2-5 days). Postage upgrades available at checkout.
Please make your, ‘No. of Items in Pack‘, ‘Length‘ and, ‘Quantity‘ of packs selection from the drop down menus.
If the size you need isn’t shown, please make inquires.
A2/ 304 Stainless Steel, UNF, 7/16″, Hex Bolts and Hex Sets Lengths available:
(FT– Fully Threaded,PT– Partially Threaded)
| 7/16″-20×1 1/4″,(FT) UNF HEXAGON SET SCREW UNF STAINLESS A2 |
| 7/16″-20×1 1/2″,(FT) UNF HEXAGON SET SCREW UNF STAINLESS A2 |
| 7/16″-20×2″,(PT) UNF HEXAGON BOLT UNF STAINLESS A2 |
| 7/16″-20×2 3/4″,(PT) UNF HEXAGON BOLT UNF STAINLESS A2 |
| 7/16″-20×3″,(PT) UNF HEXAGON BOLT UNF STAINLESS A2 |
| 7/16″-20×3 1/4″,(PT) UNF HEXAGON BOLT UNF STAINLESS A2 |
| 7/16″-20×3 1/2″,(PT) UNF HEXAGON BOLT UNF STAINLESS A2 |
Request lengths
A2/ 304 Stainless Steel
A2, otherwise known as 304 Stainless Steel is the regular stainless standard. It can resist intermittent weathering without corroding and loosing it’s metallic finish.
Bolt vs Screw
A screw screws into something, a bolt joinsseveral things together from both sides of materials joined. Both a screw and bolt’s length is measured from the underside of the head to the end of the fastener.
Table to show the different listing sizes and if they are hex-sets or hex-bolts
|
Fixaball Specialists in Fixings and Fasteners UNC 7/16 Sizes (20 TPI) |
|
|
1.1/4″ |
Fully Threaded |
|
1.1/2″ |
Fully Threaded |
|
2″ |
Partially Threaded |
|
3 |
Partially Threaded |
UNIFIED THREAD STANDARDS
Thread standards agreed upon by standard bodies of Canada, the United Kingdom, and the United States.
Unified National (UN)thread form with a rounded root contour, applies only to external threads. (The UN thread form has a flat, or optionally, a rounded root contour.) The majority of fasteners with a Unified thread form (UNC, UNF) have a rounded root contour i.e. are UNR threads.
Unified National Fine (UNF)is a thread form with a 60 degree flank angle rounded roots and flat crests. For a given diameter it has a smaller thread pitch than an equivalent diameter UNC thread.
